Hot Press
QC-674A Hot Press
The Programmable Hot Press is designed for forming plastic or rubber materials into plates by applying stable pressure and heat. It is used for preparing research samples, products, specimens, and more. The touch screen interface is simple to use and operate. This machine supports an 8-stage setting under different pressure and compression duration, ensuring an even specimen molding and reducing bubbles.
The equipment incorporates a water cooling system to shorten the cooling time and improve molding efficiency. The display shows a double curve graph of pressure and temperature, providing better control over force, time, and temperature changes during the molding processes. Additionally, the machine supports manual mode for versatile applications.
Specification
| Pressure | 10, 20, 30, 50 ton (5-100% of the max. capacity is the suggested test range) |
| Units | Temperature：℃,℉ Area：m²,cm²,mm²,ft²,in² Energy：kgf,gf,tonf(long),tonf(short),lbf,ozf,kN,N,tonf(SI) Pressure：bar,kgf/cm²,KPa,MPa,mm-Aq(4℃),psi |
| Temperature | Room temperature~ 300℃ (400°C or over is optional.) |
| Heating Time | 18 mins from 50→150℃ |
| Cooling Method | A. Standard: water cooling, takes within 5 minutes to cool down from 150°C to 60°C. B. Optional: independent water chiller, the average cooling speed is 15°C per minutes. |
| Size of Heating Plate | 30×30 cm (or designated) |
| Distance Between Heating Plate | 150 mm (Max.) |
| Accessories | A set of mold for flat sheet size 250x250x2 mm. |
| Configurable Setting | Pre-press time, Pressurize Time |
| Configurable Temperature | Forming Temperature, Open Mold Temperature, 8-stage Setting Module |
| Control Way | 7” Touch Screen / Two temperature control systems in per heating plate. |
| Protection | Full Cover, Emergency Stop Button |
| Display | Instant Pressure, Temperature, Diagram |
| Power | 300°C: 3 Phase / 220V / 50 or 60 Hz / 30A 400°C: 3 Phase / 220V / 50 or 60 Hz / 40A |
| Dimension | 101x74x157 cm (W x D x H) |
| Weight | 680 kg |
