Specimen Punch
QC-603I Specimen Punch
This machine is suitable for machining polymer materials with a flat and hard surface, which used be used as regular samples and specimens. First, prepare a mold based on the required dimension and clamp a slightly larger material than the finished product to the mold.
Then, the mold is then moved manually and slowly along the blade, which cuts out the redundant material to form the desired sample.
Standard accessory
Dumbbell mold Dumbbell mold
The mold is designed to produce dumbbell-shaped specimen. Its size can be customized to meet specific requirements (max. length 250mm, max. width 100mm)
Specification
| Material | Hardness of polymer specimen |
| Horse power | 600W |
| Cutting speed | 99 sector speed change |
| Speed ragne | 150~3500 rpm |
| Specimen thickness | 2 ~ 15 mm |
| Capacity for mold | Length: 25-280mm Width: 20-70mm Height: 30mm |
| Minimum cutting R angle | R＝6 mm |
| Accessories | 1. With one dumbbell shape cutter, customized shape is also acceptable but cannot be wider than 100mm and longer than 250mm. 2. With transparent protection cover. 3. With vacuum function to assemble scrap keep it clean when operating. 4. Equipped with track to increase the stability, safety and fluency. |
| Power | Single phase, 110V or 220V(Designate) |
| Dimension | 47 × 40 × 45 cm (W x D x H) |
| Weight | 60 kg |
